> For the complete documentation index, see [llms.txt](https://fast-router-proxy.gitbook.io/genrouter/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://fast-router-proxy.gitbook.io/genrouter/how-to-use/proxy-distribution-feature.md).

# Proxy distribution feature

**Step 1:** In the Devices Manager section, select "Setup Router" ⇒ switch to the "Proxy Distribute" tab, and enable "Enable proxy."

<figure><img src="/files/zM1C5EG3ZqMRZXLNfCEa" alt=""><figcaption></figcaption></figure>

<figure><img src="/files/QWPhKj8q5jn3ZJIHhoUi" alt=""><figcaption></figcaption></figure>

**Step 2:** Configuration

* For the **Rotate Proxy** mode: This allows users to assign multiple proxies to devices and rotate them at regular intervals based on the set time. (For example: If you add 10 proxies to 5 devices, these 10 proxies will randomly rotate among the 5 devices every 10 seconds.)\
  \&#xNAN;***Rotate Time:** Choose the number of seconds to change the proxy once.*

<figure><img src="/files/AFh8QWTmT50u04rLdUnj" alt=""><figcaption></figcaption></figure>

* For the **Allow Duplicate** mode: This allows the same proxy to be used by multiple devices. (For example: If you add 2 proxies to 3 devices, 2 devices will share the same proxy.)\
  \&#xNAN;***Note:** If this mode is not enabled, each proxy can only be assigned to one device. If the number of proxies is fewer than the number of devices, devices without a proxy will use their original IP address.*

<figure><img src="/files/nvJNu3MJxoL9pRe6I8f5" alt=""><figcaption></figcaption></figure>