# Proxy distribution feature

**Step 1:** In the Devices Manager section, select "Setup Router" ⇒ switch to the "Proxy Distribute" tab, and enable "Enable proxy."

<figure><img src="https://2666203676-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FxJvJkswBo8lye92elh0k%2Fuploads%2F3ZHVLoIqt4jEMPJusV1b%2Fimage.png?alt=media&#x26;token=1aa60069-0373-4586-b3c5-a6ecdf1f2068" alt=""><figcaption></figcaption></figure>

<figure><img src="https://2666203676-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FxJvJkswBo8lye92elh0k%2Fuploads%2FoVorS4Ts3foUSI1dk7Xb%2Fimage.png?alt=media&#x26;token=15b794e5-8fe1-40da-ab58-6b91ef5a90f2" alt=""><figcaption></figcaption></figure>

**Step 2:** Configuration

* For the **Rotate Proxy** mode: This allows users to assign multiple proxies to devices and rotate them at regular intervals based on the set time. (For example: If you add 10 proxies to 5 devices, these 10 proxies will randomly rotate among the 5 devices every 10 seconds.)\
  &#xNAN;_**Rotate Time:** Choose the number of seconds to change the proxy once._

<figure><img src="https://2666203676-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FxJvJkswBo8lye92elh0k%2Fuploads%2FbnM8SBTZyi9r0XZw66VA%2Fimage.png?alt=media&#x26;token=e01c1474-353e-4a55-aa2b-12871b916d26" alt=""><figcaption></figcaption></figure>

* For the **Allow Duplicate** mode: This allows the same proxy to be used by multiple devices. (For example: If you add 2 proxies to 3 devices, 2 devices will share the same proxy.)\
  &#xNAN;_**Note:** If this mode is not enabled, each proxy can only be assigned to one device. If the number of proxies is fewer than the number of devices, devices without a proxy will use their original IP address._

<figure><img src="https://2666203676-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FxJvJkswBo8lye92elh0k%2Fuploads%2FZEJjbfaUiXZJVxz7y7D7%2Fimage.png?alt=media&#x26;token=08a8e18e-aeae-47b0-bf25-c11642948ff2" alt=""><figcaption></figcaption></figure>
