> For the complete documentation index, see [llms.txt](https://fast-router-proxy.gitbook.io/genrouter/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://fast-router-proxy.gitbook.io/genrouter/how-to-use/emulator-integration/ld-player.md).
# LD PLAYER
**Step 1:**
Open LDPlayer and click the ☰ (**three horizontal lines**) icon at the top-right corner.
**Step 2:**
Select “Settings” from the menu.
**Step 3:**
In the settings window, go to the “Network” tab.
**Step 4:**
Enable “Network Bridging” mode.
**Step 5:**
Click “**Click to install**” if this is your first time setting it up.
⚠️ This step only needs to be done once per machine.
**Step 6:**
Agree to the installation and wait until the message “**Installation successful**” appears.
**Step 7:**
Click “**Save settings**” to apply the network configuration.
**Step 8:**
Click “**Restart now**” to let LDPlayer apply the new settings.
**Step 9:**
Once LDPlayer restarts, open “**Settings**” inside the Android emulator.
**Step 10:**
Scroll down and select “**About tablet**”.
Step 11:
Check that the **IP address** matches the one in GenRouter (e.g., 192.168.5.1:9000).
**Step 12:**
After entering the proxy into the input field, click “**Apply for Device**” to apply the proxy settings to LDPlayer.
```
Example format: host:port:user:pass
```
You can choose either **HTTP** or **SOCKS5** as the proxy type.
**Step 15:**
Go back to the GenRouter website and check:
• Has the **IP address** changed?
• Is **WebRTC** leaking your original IP?
**👉 Before using GenRouter with proxy**
**👉 After using GenRouter with proxy**
✅ Done!
You’ve successfully connected LDPlayer with GenRouter 🎉